作業
The assigned readings and problem sets are noted in the table below.
The chapters referred to are from the textbook: Todreas, Neil E., and Mujid S. Kazimi. Nuclear Systems: Thermal Hydraulic Fundamentals. Vol. 1. New York: Taylor & Francis Inc.: December 1, 1989. 3rd printing. ISBN: 1560320516.
The chapters referred to are from the textbook: Todreas, Neil E., and Mujid S. Kazimi. Nuclear Systems: Thermal Hydraulic Fundamentals. Vol. 1. New York: Taylor & Francis Inc.: December 1, 1989. 3rd printing. ISBN: 1560320516.
| 課 | 課程單元 | 閱讀資料 | 習題 |
|---|---|---|---|
| 1 | Course Introduction and Reactor Types | Chapter 1 | |
| 2 | Reactor Heat Generation | Chapter 2 (III) Chapter 3 (I, II, IV, V, VIII) |
2-1, 2-7N (PDF), 3-5, 3-7N (PDF) |
| 3 | Thermal Design Principles Conservation Equation |
Chapter 2 (V, VI) Chapter 4 (III-B, V-A, B, C) |
2-4, 2-5, 4-7 |
| 4 | Rankine Power Cycles | Chapter 6 (IV-A, V) | 6-2, 6-3 (1, 2), 6-5 |
| 5 | Brayton Power Cycles | Chapter 6 (VI, VII) | 6-12N (PDF), 6-15N (PDF) |
| 6 | Containment Analysis | Chapter 7 (II-B) | 3-6N (PDF), 7-1 |
| 7 | Containment Analysis (cont.) | Chapter 7 (II-B) | 7-2, 7-4 |
| 8 | Thermal Analysis of Fuel Elements (Introduction) | Chapter 8 (I, II, III) | 8-1 |
| 9 | Thermal Analysis of Fuel Elements (Temperature Distributions) | Chapter 8 (IV, V, VII) | 8-4, 8-11N (PDF), 8-13N (PDF) |
| 10 | Thermal Analysis of Fuel Elements (Maximum Temperature in the Core) | Chapter 8 (VI) Chapter 13 (IV-B) |
8-5, 13-1, 13-2 |
| 11 | Quiz 1 (Open Book) All materials through Lecture 7 |
||
| 12 | Single-Phase Thermal-Hydraulics (Introduction) | Chapter 9 (III, IV-A) Chapter 10 (I, II-A) |
9-1, 9-2 |
| 13 | Single-Phase Thermal-Hydraulics (Fluid Dynamic) | Chapter 9 (IV-B, C, V-C, D, E, VII-A) | 9-4, 9-5 |
| 14 | Single-Phase Thermal-Hydraulics (Heat Transfer) | Chapter 10 (II-B, C, V) | 10-2, 10-4, 10-5 |
| 15 | Single-Phase Thermal-Hydraulics (Turbulence and Natural Circulation) | Chapter 9 (V-A, B) Chapter 10 (III, IV) |
|
| 16 | Two-Phase Fluid Mechanics (Basic Parameters and Models) | Chapter 5 (IV, V) Chapter 11 (I, II-A, C, III, IV) |
5-1, 5-3, 11-5 |
| 17 | Two-Phase Fluid Mechanics (Pressure Drop and Models) | Chapter 11 (V) | 11-6 |
| 18 | Two-Phase Fluid Mechanics (Critical Flow) | Chapter 11 (VI) | 11-8N (PDF), 11-10N (PDF) |
| Quiz 2 (Take Home) All materials from Lecture 8 to Lecture 15 |
|||
| 19 | Two-Phase Heat Transfer (Pool Boiling) | Chapter 12 (I, II, II-A) | 12-1, 12-2 |
| 20 | Two-Phase Heat Transfer (Flow Boiling) | Chapter 12 (III-B, IV, V) | 12-6N (1, 2) (PDF) |
| 21 | Two-Phase Heat Transfer (Boiling Crises) | Chapter 12 (VI, VII) | 12-9N (PDF), 12-11N (PDF) |
| 22 | Two-Phase Heat Transfer (Condensation) | Incropera and DeWitt (10.6-10.11) | 10-44 (I&D) |
| 23 | Two-Phase Fluid Mechanics and Heat Transfer (Demonstrations) | ||
| 24 | Structural Mechanics (Elasticity Fundamentals and Thin-Shell Theory) | Note L.4 | S1-1 (PDF), S2-1 (PDF) |
| 25 | Structural Mechanics (Stress Categorization and ASME Code) | ASME handout | S4-1 (PDF), S5-2 |
| Final Exam 3 hours Open Book - Final exam will cover entire course with specific attention to material of Lectures 16-25 |
