I.完美晶體
I. Perfect Crystals |
| 1 |
結構：米勒指標、體心立方、面心立方、六方緊密堆積
Structure: Miller Indices, BCC, FCC, HCP |
|
| 2 |
形變：滑移系統、單軸向應力-應變、降伏強度及硬度
Deformation: Slip Systems, Uniaxial Stress-strain, Yield Strength and Hardness |
|
| 3 |
形變：滑移系統、單軸向應力-應變、降伏強度及硬度 (繼續)
Deformation: Slip Systems, Uniaxial Stress-Strain, Yield Strength and Hardness (cont.) |
|
II.結晶缺陷
II. Crystalline Defects |
| 4 |
1維：空缺及間隙插入缺陷
1D: Vacancies and Interstitials |
|
| 5 |
2維：差排
2D: Dislocations
2維缺陷簡介
Introduction to 2D Defects |
|
| 6 |
2維：差排(繼續)
2D: Dislocations (cont.)
線差排: 結構, b和ζ, 內能Ψ
Edge: Structure, b and ζ, Self Energy Ψ |
第一份問題集繳交截止日
Problem set 1 due |
| 7 |
2維：差排(續)
2D: Dislocations (cont.)
螺旋差排: 結構, b和ζ, 內能Ψ
Screw: Structure, b and ζ, Self Energy Ψ |
|
| 8 |
2維：差排(繼續)
2D: Dislocations (cont.)
差排的互動: 晶體角落及交錯節點
Dislocation Interactions: Kinks and Jogs |
|
| 9 |
2維：差排(續)
2D: Dislocations (cont.)
Peach-Kohler力
Peach-Kohler Forces |
|
| 10 |
3維：晶界
3D: Grain Boundaries
偶極子
Dipoles
斜晶界面
Tilts
大角度相對於小角度晶界
Large vs. Small Angle
共享位置晶格點
Coincident Site Lattices |
|
| 11 |
對物理化學性質的影響
Physical/Chemical Effects
回復, 再結晶, 晶粒成長
Recovery, Recrystallization, Grain Growth
腐蝕
Corrosion
固溶原子聚集
Solute Aggregation |
第二份問題集繳交截止日
Problem set 2 due |
| 12 |
對機械性質的影響
Mechanical Effects
強化
Strengthening
晶粒大小的影響
Grain Size Effects
非晶相的條件限制
Amorphous Limit
潛變
Creep |
|
| 13 |
期中考
Midterm |
第三份問題集繳交截止日
Problem set 3 due |
III.動力變化過程
III. Kinetic Processes |
| 14-15 |
成核
Nucleation |
|
| 16 |
成長
Growth |
|
| 17 |
粗粒化
Coarsening |
|
| 18-21 |
旋節點分解: 介穩相
Spinodal Decomposition: Metastable Phase |
第21堂課為第四份問題集的繳交截止日
Problem set 4 due on session 21 |
| 22-23 |
回復, 再結晶及晶粒成長
Recovery, Recrystallization and Grain Growth |
|
IV.應用範例研究
IV. Case Studies |
| 24-25 |
銜接點設計
Interconnect Design |
第25堂課為第五份問題集的繳交截止日
Problem set 5 due on session 25 |
| 26 |
藥劑輸送裝置設計
Drug Delivery Device Design |
|
| 27 |
磁性硬碟設計
Magnetic Hard Drive Design |
|
| 28 |
期末考
Final Exam |
|
